For years, the standard method of lighting gymnasiums has been the 400W Metal Halide High Bay. This has led to gyms with deteriorating light levels and poor playing conditions that are expensive to operate. New technologies have allowed lighting designers to specify T5 High Output (T5HO) Fluorescent High Bay Fixtures in place of the more inefficient metal halide fixtures. This shift has reduced the power consumption of gymnasium lighting systems, provided better quality light for all sports activities, and has allowed for a more versatile environment in school or recreational center gyms.

A Better, More Energy-Efficient Gym Light

Traditional 400 W Metal Halide high bays consume a total of 454 Watts of power - 400 Watts for the lamp and an additional 54 watts of ballast power. By comparison, a 4-lamp T5HO fixture consumes only 228 Watts of power while a 6-lamp fixture consumes 342 Watts. This lower energy consumption allows for a reduction in total lighting system consumption and therefore a lower electric bill. To provide concrete numbers, let's work with an example high school gym and assume we're investigating replacing 24 existing 400W MH fixtures with T5HO fluorescent fixtures. The table below summarizes the costs associated with lighting this gym assuming a cost of $0.10 per kWh and an annual usage of 2,500 hours.

T5HO High Bays in Gymnasium Applications

Light level recommendations for gymnasiums range from 30 foot candles (fc) for recreational gyms to over 100 fc for professional gymnasiums used to televise sporting events.

Adding additional details to our example gym above, we can provide expected light levels for our retrofit project. Let's say that our example gymnasium is 100' long by 60' wide (typical dimensions for high school or junior high school gyms). The ceiling is 20' high and the fixtures are mounted 18' from the floor. Using typical reflectances for all the surfaces, we can calculate the expected light levels in this gym.

We've listed the light level in the 400 W MH column as varied because depending on their age, the metal halide fixtures can have a vastly varying level of light output. As metal halide lamps begin to "burn out", the halides in the arc tube that give the lamp it's initial bluish white color fail at different rates. When this occurs, it causes the metal halide lamp to shift color to green, pink or yellow as its end of life approaches. This color shift also leads to lumen depreciation that will cause the lamp to deliver less than half of its initial light output while still consuming the same 454 watts of electricity.

CRI or Color Rendering Index is greatly improved with T5 Fluorescent lamps. The high quality tri-phosphor coatings used in our T5 lamps deliver a CRI index of 90 - more than 20 points higher than standard metal halide lamps. In a Gymnasium application this very important for visual acuity and to allow greater differentiation between objects of similar colors.

The diagram below provides point-by-point light levels for both the 4-lamp and 6-lamp layouts.

To further illustrate this example, we have provided lighting layouts for both the 4-lamp and 6-lamp example gymnasium below. We have also included a version with both layouts shown side by side for easy comparison. Electrical Marketplace can provide customized lighting layouts for your gymnasium with the same level of detail shown in these diagrams. Don't hesitate to contact us using the form on the upper right hand portion of this page if you would like to see what results you can achieve in your gym.

Example Gym Layout, 4-Lamp T5

Lighting Layout for Example Gymnasium using 4-lamp T5HO fixtures.

Example Gym Layout, 6-Lamp T5

Lighting Layout for Example Gymnasium using 6-lamp T5HO fixtures.

Example Gym Layout, Side-by-Side

Lighting Layout for Example Gymnasium using both 4-lamp and 6-lamp T5HO fixtures shown side-by-side for comparison.